INDUSTRIAL TRADING CENTER
INDUSTRIAL TRADING CENTER
Varachha Road, Surat, Gujarat
GST No. 24AAFFI6374J1Z5
TrustSEAL Verified
Call 0804763887983% Response Rate
SEND EMAIL

Motor Drive

Our range of products include stepper motor 42cm02-1a, 86 cm 45 two phase stepper motor, hybrid stepper motor, dm 556 stepper drives, dma 860e stepper drives and stepper motor 57cm13.

Stepper Motor 42CM02-1A

Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
  • Stepper Motor 42CM02-1A
Get Best Quote
Approx. Price: Rs 700 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number42CM02-1A
BrandITC
Voltage2.1 V
Torque0.21 N.m (30 oz-in)
Current1.0 A/Phase
DimensionNEMA 17

The 42CM02-1A is a 2 phase NEMA 17 stepper motor with 0.21 N.m (30 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 42CM02-1A stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 42CM02-1A
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

86 CM 45 Two Phase Stepper Motor

86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
  • 86 CM 45 Two Phase Stepper Motor
Get Best Quote
Approx. Price: Rs 2,200 / PieceGet Latest Price

Product Details:

Step Angle1.8 Degree
Of Leads8
Model86HS45
Dielectric Strength500 VAC For One Minute
Insulation Resistance1000M Ohm min
Shaft Axial Play0.08 max ( 450 g load)
Shaft Radial Play0.06 max ( 450 g load)
Weight2.3 kg
Holding Torque3.2 Nm, 4.5
ConnectionParallel, Series, Unipolar
NEMA Size34
Angle Accuracy+/- 5% ( Full step no Load)
Length L80 mm
Ambient Temperature-10 degree C~+ 50 degree C
Current Phase6.0 A
Phase2
Temperature Rise80 degree C

The 86CM45 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series, bipolar parallel and unipolar.


Features:

  • 2 phase 1.8° stepping angle
  • NEMA 34
  • Holding toque of 4.5 N*m (637 oz-in)
  • High precision
  • Smooth movement
  • Low motor heating
  • Low movement noise
Request
Callback
Yes! I am Interested

Hybrid Stepper Motor

Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
  • Hybrid Stepper Motor
Get Best Quote
Approx. Price: Rs 600 / UnitGet Latest Price

Product Details:

Minimum Order Quantity1 Unit
No Of Phase1
Step Angle1.8 Degree
Motor TypeUnipolor
Current1.5 A
Torque<10 Kgcm
Country of OriginMade in India

Established as a Partnership firm in the year 2016, we “Industrial Trading Centre” are a leading Manufacturer of a wide range of Stepper DrivesTwo Phase Stepper Motor, etc. Situated in Surat (Gujarat, India), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. We offer these products at reasonable rates and deliver these within the promised time-frame. Under the headship of our mentor “Mr. Umesh Mokani”, we have gained a huge clientele across the nation.
Request
Callback


Additional Information:

  • Production Capacity: 100
  • Delivery Time: 1 day
  • Packaging Details: BOX PACKING
Yes! I am Interested

DM 556 Stepper Drives

DM 556 Stepper Drives
  • DM 556 Stepper Drives
  • DM 556 Stepper Drives
  • DM 556 Stepper Drives
  • DM 556 Stepper Drives
Get Best Quote
Approx. Price: Rs 1,700 / PieceGet Latest Price
Product Brochure

Product Details:

Supply voltage+20~+50VDC
Logic signal current16mA
Pulse input frequency200 kHz
Isolation resistance500 Mohm
ParametersDM556
Output current0.5-5.6 (4.0 RMS)A


The DM556 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. The Self-test and auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the DM556 an ideal solution for applications that require low-speed smoothness.


Features:
  • Extra-low motor noise offers excellent quietness
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Self-test and Auto-configuration technology, offers optimum responses with different motors
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev 
  • Supply voltage up to +50 VDC 
  • Output current programmable, from 0.5A to 5.6A
  • Pulse input frequency up to 200 KHz 
  • Automatic idle-current reduction
  • Supports PUL/DIR and CW/CCW modes.


Specifications:
Pin FunctionDetails
PUL+Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (software configurable); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse,active both at high level and low level (software configurable). For reliable response, pulse width should be longer than 2.5µs. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.
PUL-
DIR+DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (software configurable), this signal is counter-clock (CCW) pulse,active both at high level and low level (software configurable). For reliable motion response, DIR signal should be ahead of PUL signal by 5µs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-drive wiring match. Exchanging the connection of two wires for a coil to the drive will reverse motion direction.
DIR-
ENA+Enable signal: This signal is used for enabling/disabling the drive. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the drive and low level for disabling the drive. Usually left UNCONNECTED (ENABLED).
ENA-
Request
Callback
Yes! I am Interested

DMA 860E Stepper Drives

DMA 860E Stepper Drives
  • DMA 860E Stepper Drives
  • DMA 860E Stepper Drives
  • DMA 860E Stepper Drives
Get Best Quote
Approx. Price: Rs 2,600 / PieceGet Latest Price
Product Brochure

Product Details:

Input PhaseSingle Phase
Supply voltage80 VDC
ParametersM860
Pulse input frequency0-300 kHz
Isolation resistance500 Mohm
Logic signal current16 mA
Output current1.8-7.2 (5.1 RMS) A

For catering the variegated needs of our clients, we are deeply engrossed in offering a qualitative array of DMA 860E Stepper Drives.

Detail:
The DMA 860E is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Features:
  • Extremely cost-effective
  • Good high speed performance
  • Supply voltage up to +72VDC
  • Output current up to 7.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current andshort-circuit protection

Specifications:
MicrostepSteps/rev.(for 1.8o motor)SW5SW6SW7
2400ononon
4800offonon
61600onoffon
163200offoffon
326400ononoff
6412800offonoff
12825600onoffoff
25651200offoffoff
51000ononon
102000offonon



Request
Callback
Yes! I am Interested

Stepper Motor 57CM13

Stepper Motor 57CM13
  • Stepper Motor 57CM13
  • Stepper Motor 57CM13
  • Stepper Motor 57CM13
Get Best Quote
Approx. Price: Rs 900 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Voltage1.68 V
Torque1.3N.m (185 oz-in)
Current4 A/Phase
DimensionNema 23

The 57CM13 is a 2 phase NEMA 23 stepper motor with 1.3 N.m (185 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 57CM13 stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 57CM13
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Close Loop Stepper Motor CS-M 22326

Close Loop Stepper Motor CS-M  22326
  • Close Loop Stepper Motor CS-M  22326
  • Close Loop Stepper Motor CS-M  22326
  • Close Loop Stepper Motor CS-M  22326
  • Close Loop Stepper Motor CS-M  22326
Get Best Quote
Approx. Price: Rs 2,500 / PieceGet Latest Price
Product Brochure

Product Details:

No Of Phase2
Step Angle1.8 Degree
Model Name/NumberCS-M22326
BrandITC
Torque2.6 N.M
Current5 A
DimensionNEMA 23
CommutationBrushless
FrequencyHigh precision, low motor heating, and low vibration
WarrantyNo Warranty
Shaft Diameter8 mm (0.315 inch) shaft size
Power Supply Input FrequencyHigh precision, low motor heating, and low vibration
Motor Length104 mm (4.09 inch) long

The CS-M22326 is a 2 phase stepper motor with 2.6 N.m (369 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder. Build with high quality materials including bearings and shaft made by Japanese manufacturers, this closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.
Request
Callback


Additional Information:

  • Item Code: CS-M22326
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Close Loop Stepper Motor CS-M22323B

Close Loop Stepper Motor CS-M22323B
  • Close Loop Stepper Motor CS-M22323B
  • Close Loop Stepper Motor CS-M22323B
  • Close Loop Stepper Motor CS-M22323B
  • Close Loop Stepper Motor CS-M22323B
Get Best Quote
Approx. Price: Rs 8,340 / PieceGet Latest Price
Product Brochure

Product Details:

No Of Phase2
Step Angle1.8 Degree
Voltage<100 V
Torque2.3 N.M
Current5 A
DimensionNema 23

The CS-M22323B is a 2 phase NEMA 23 closed loop stepper motor with 2.3 N.m (326 oz-in) holding torque and integrated with a 24 volt permanent magnet brake with 2.0 N.m (284 oz-in) friction torque.
Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this CS-M22323B stepper motor can move the attached load at high precision and with very low motor heating & vibration.
The integrated 24 VDC brake can be controlled by a closed loop stepper drive or another control device such as a PLC or motion controller, and automatically engaged whenever the motor is powered off.
Request
Callback


Additional Information:

  • Item Code: CS-M22323B
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Close Loop Stepper Motor CS-M 23480

Close Loop Stepper Motor CS-M 23480
  • Close Loop Stepper Motor CS-M 23480
  • Close Loop Stepper Motor CS-M 23480
  • Close Loop Stepper Motor CS-M 23480
  • Close Loop Stepper Motor CS-M 23480
Get Best Quote
Approx. Price: Rs 5,500 / PieceGet Latest Price
Product Brochure

Product Details:

No Of Phase2
Step Angle1.8 Degree
BrandITC
Voltage3.8V
Torque8.0 N.M
Current6.0A
DimensionNEMA 34
CommutationBrushless
Weight3.5KG
Size/Dimension14 mm (0.551 inch)
FrequencyHigh precision, low motor heating, and low vibration
WarrantyNo Warranty
Power Supply Input FrequencyHigh precision, low motor heating, and low vibration
Steps Per Rotation1.8 Degree

The CS-M23480 is a 2 phase stepper motor with 8 N.m (1133 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder. Build with high quality materials including bearings and shaft made by Japanese manufacturers, this closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.
Request
Callback


Additional Information:

  • Item Code: CS-M23480
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Hybrid Stepper Motor 57CM23

Hybrid Stepper Motor  57CM23
  • Hybrid Stepper Motor  57CM23
  • Hybrid Stepper Motor  57CM23
  • Hybrid Stepper Motor  57CM23
Get Best Quote
Approx. Price: Rs 1,210 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number57CM23
BrandITC
Voltage1.9 V
Torque2.3N.m (326 oz-in)
Current5 A/Phase
DimensionNEMA 23

The 57CM23 is a 2 phase NEMA 23 stepper motor with 2.3 N.m (326 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 57CM23 stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 57CM23
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Stepper Motor 35HS01

Stepper Motor 35HS01
  • Stepper Motor 35HS01
  • Stepper Motor 35HS01
  • Stepper Motor 35HS01
  • Stepper Motor 35HS01
  • Stepper Motor 35HS01
  • Stepper Motor 35HS01
Get Best Quote
Approx. Price: Rs 400 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Speed3000 RPM
No Of Phase2
ApplicationRegular
Step Angle1.8 Degree
PhaseSingle Phase
Current<100 mA
Model Name/NumberNema 14
Country of OriginMade in India

The 35HS01 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 4 motor leads.
Request
Callback


Additional Information:

  • Item Code: 35HS01
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

42cm02 Stepper Motor

42cm02 Stepper Motor
  • 42cm02 Stepper Motor
  • 42cm02 Stepper Motor
  • 42cm02 Stepper Motor
  • 42cm02 Stepper Motor
  • 42cm02 Stepper Motor
Get Best Quote
Approx. Price: Rs 970 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Speed3000 RPM
No Of Phase2
Step Angle1.8 Degree
Current1 A
Model Name/NumberNema17
Torque0.21 N.M

The 42CM02 is a 2 phase NEMA 17 stepper motor with 0.21 N.m (30 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 42CM02 stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 42cm02
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

57CM13-3A Hybrid Stepper Motor

57CM13-3A Hybrid Stepper Motor
  • 57CM13-3A Hybrid Stepper Motor
  • 57CM13-3A Hybrid Stepper Motor
  • 57CM13-3A Hybrid Stepper Motor
  • 57CM13-3A Hybrid Stepper Motor
Get Best Quote
Approx. Price: Rs 915 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number57CM13-3A
BrandITC
Voltage2.4 V
Torque1.3N.m (185 oz-in)
No Load Current3 A/Phase

The 57CM13-3A is a 2 phase NEMA 23 stepper motor with 1.3 N.m (185 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 57CM13-3A stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 57CM13-3A
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

57CM23-4A Hybrid Stepper Motor

57CM23-4A Hybrid Stepper Motor
  • 57CM23-4A Hybrid Stepper Motor
  • 57CM23-4A Hybrid Stepper Motor
  • 57CM23-4A Hybrid Stepper Motor
Get Best Quote
Approx. Price: Rs 1,210 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number57CM23-4A
BrandITC
Voltage2 V
Torque2.3N.m (326 oz-in)
Current4 A/Phase
DimensionNEMA 23
Weight1.1 kg (2.42 lb)

The 57CM23-4A is a 2 phase NEMA 23 stepper motor with 2.3 N.m (326 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 57CM23-4A stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 57CM23-4A
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

D57CM31-4A NEMA Stepper Motor

D57CM31-4A NEMA Stepper Motor
  • D57CM31-4A NEMA Stepper Motor
  • D57CM31-4A NEMA Stepper Motor
  • D57CM31-4A NEMA Stepper Motor
  • D57CM31-4A NEMA Stepper Motor
Get Best Quote
Approx. Price: Rs 2,502 / PieceGet Latest Price
Product Brochure

Product Details:

No Of Phase2
Step Angle1.8 Degree
Torque3.1 N.M
BrandITC
Voltage2.5 V
Phase2
Current4.0 A
DimensionNEMA 34
Weight1.4KG
FrequencyHigh precision, low motor heating, and low vibration
WarrantyNo Warranty

The D57CM31-4A is a 2 phase NEMA 23 stepper motor with 3.1 N.m (439 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this D57CM31-4A stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: D57CM31-4A
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Hybrid Stepper Motor 863S68H-NEMA34

Hybrid Stepper Motor 863S68H-NEMA34
  • Hybrid Stepper Motor 863S68H-NEMA34
  • Hybrid Stepper Motor 863S68H-NEMA34
  • Hybrid Stepper Motor 863S68H-NEMA34
  • Hybrid Stepper Motor 863S68H-NEMA34
Get Best Quote
Approx. Price: Rs 5,484 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase3
Step Angle1.8 Degree
DimensionNema 34
Model Name/NumberNema 34
Current<100 mA
WEIGHT4.0

The 863S68H three-phase stepper motor is suitable for a wide range of motion control applications. Terminated with  6 motor leads, the motor can be connected in delta connection.
Request
Callback


Additional Information:

  • Item Code: 863S68H-NEMA34
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Hybrid Stepper Motor 57CM06

Hybrid Stepper Motor 57CM06
  • Hybrid Stepper Motor 57CM06
  • Hybrid Stepper Motor 57CM06
  • Hybrid Stepper Motor 57CM06
  • Hybrid Stepper Motor 57CM06
  • Hybrid Stepper Motor 57CM06
Get Best Quote
Approx. Price: Rs 902 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number57CM06
BrandITC
Voltage2.1 V
Torque0.6N.m (85 oz-in)
Current3 A/Phase
DimensionNEMA 23
Weight0.45 kg (1. lb)

The 57CM06 is a 2 phase NEMA 23 stepper motor with 0.6 N.m (85 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 57CM06 stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 57CM06
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

28cm013 NEMA 11 Stepper Motor

28cm013 NEMA 11 Stepper Motor
  • 28cm013 NEMA 11 Stepper Motor
  • 28cm013 NEMA 11 Stepper Motor
  • 28cm013 NEMA 11 Stepper Motor
  • 28cm013 NEMA 11 Stepper Motor
Get Best Quote
Approx. Price: Rs 1,430 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
MountingFrame Size Nema 11
Model Name/NumberNema 11
Current1.2 A
DimensionNema 11
BRAND28cm013
Country of OriginMade in India

The 28CM013 is a 2 phase NEMA 11 stepper motor with 0.13 N.m (18 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 28CM013 stepper motor can move the attached load at high precision and with very low motor heating & vibration
Request
Callback


Additional Information:

  • Item Code: 28cm013
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

86 HS 65 Two Phase Stepper Motor

86 HS 65 Two Phase Stepper Motor
  • 86 HS 65 Two Phase Stepper Motor
  • 86 HS 65 Two Phase Stepper Motor
  • 86 HS 65 Two Phase Stepper Motor
  • 86 HS 65 Two Phase Stepper Motor
Get Best Quote
Approx. Price: Rs 3,500 / PieceGet Latest Price
Product Brochure

Product Details:

Model No86HS65
ConnectionBipolar(Parallel), Bipolar ( Series), Unipolar
Holding Torque Oz693.8 (4.9) In(Nm), 991(7.0)
Number of Leads8
Weight81.1(2.3) Oz(Kg)
Motor Length L3.78 (96) Inch(MM)
Phase Current Amps6.1 A
Phase Resistance0.355+/-10%,1.4+/-10%0.7+/-10% ohm
Phase Inductance3.3+/-20%,13.2+/-20%,3.3+/-20%mH
Rotor Intertia Oz0.01988(1400) In-sec2 (g.cm2)

The 86HS65 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series , bipolar parallel and unipolar.
Features:
  • 2 phase 1.8° stepping angle
  • NEMA 34
  • Holding toque of 7 N*m (991 oz-in)
  • High precision
  • Smooth movement
  • Low motor heating
  • Low movement noise
 
Request
Callback
Yes! I am Interested

DM 2282 Stepper Drives

DM 2282 Stepper Drives
  • DM 2282 Stepper Drives
  • DM 2282 Stepper Drives
  • DM 2282 Stepper Drives
  • DM 2282 Stepper Drives
  • DM 2282 Stepper Drives
Get Best Quote
Approx. Price: Rs 9,000 / PieceGet Latest Price
Product Brochure

Product Details:

Temperature77 degree C
ParametersDM2282
Output current0.5-8.2 (5.9 RMS) A
Supply voltage80(115) -220(305) VAC(VDC)
Logic signal current7-16 mA
Pulse input frequency0-200 kHz
Isolation resistance500 Mohm

The DM2282 is a high voltage, versatility fully digital stepping driver based on a DSP with advanced control algorithm.  It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-configuration technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drivers on the markets. Its unique features make the DM2282 an ideal solution for applications that require low-speed smoothness.
Features:
  • Extra-low motor noise offers excellent quietness
  • Anti-Resonance, provides optimum torque and nulls mid-range instability
  • Self-test and Auto-configuration technology, offers optimum responses with different motors
  • Microstep resolutions programmable, from full-step to 102,400 steps/rev  
  • Supply voltage up to 220 VAC  
  • Output current programmable, from 0.5A to 8.2A 
  • Pulse input frequency up to 200 KHz  
  • Automatic idle-current reduction 
  • Supports PUL/DIR and CW/CCW modes
Specifications:
Pin Functions Details
PUL+ Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (software configurable); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse???active both at high level and low level (software configurable). For reliable response, pulse width should be longer than 2.5μs. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.
PUL-
DIR+ DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (software configurable), this signal is counter-clock (CCW) pulse???active both at high level and low level (software configurable). For reliable motion response, DIR signal should be ahead of PUL signal by 5μs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-driver wiring match. Exchanging the connection of two wires for a coil to the driver will reverse motion direction.
DIR-
ENA+ Enable signal: This signal is used for enabling/disabling the drive. In default, high level (NPN control signal) for enabling the driver and low level for disabling the driver. Usually left UNCONNECTED (ENABLED). Please note that PNP and Differential control signals are on the contrary, namely Low level for enabling. The active level of ENA signal is software configurable.
ENA-
FAULT+ Fault Signal:  OC output signal, active when one of the following protection is activated: over-voltage, over current, low voltage, phase error and over-temperature. This port can sink or source 20mA current at 24V. In default, the resistance between FAULT+ and FAULT- is high impedance in normal operation and become low when DM2282 goes into error.

 
Request
Callback
Yes! I am Interested

M 752 Stepper Drives

M 752 Stepper Drives
  • M 752 Stepper Drives
  • M 752 Stepper Drives
  • M 752 Stepper Drives
  • M 752 Stepper Drives
  • M 752 Stepper Drives
  • M 752 Stepper Drives
Get Best Quote
Approx. Price: Rs 3,600 / PieceGet Latest Price
Product Brochure

Product Details:

Temperature77 degree C
Isolation resistance500 Mohm
ParametersM752
Output current1.8-5.2 (3.7 RMS) A
Supply voltage+20~+75 VDC
Logic signal current16mA
Pulse input frequency300 kHz

The M752 is a high performance microstepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives on the markets. It is suitable for driving 2-phase and 4-phase hybrid stepper motors.
Features:
  • Extremely cost-effective
  • Good high speed performance
  • Supply voltage up to +75 VDC
  • Output current up to 5.2A
  • Self-adjustment technology
  • Pure-sinusoidal current control technology
  • Pulse input frequency up to 300 KHz
  • TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Short-voltage, over-voltage, over-current protections 

Specifications:
Pin FunctionDetails
PUL+Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal, each rising or falling edge active (set by inside jumper J1); 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse,active at high level or low level (set by inside jumper J1, J2). For reliable response, pulse width should be longer than 1.5µs. Series connect resistors for current-limiting when +12V or +24V used. The same as DIR and ENA signals.
PUL-
DIR+DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation; in double-pulse mode (set by inside jumper J3), this signal is counter-clock (CCW) pulse,active at high level or low level (set by inside jumper J1, J2). For reliable motion response, DIR signal should be ahead of PUL signal by 5µs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that rotation direction is also related to motor-drive wiring match. Exchanging the connection of two wires for a coil to the drive will reverse motion direction.
DIR-
ENA+Enable signal: This signal is used for enabling/disabling the drive. High level (NPN control signal, PNP and Differential control signals are on the contrary, namely Low level for enabling.) for enabling the drive and low level for disabling the drive. Usually left UNCONNECTED (ENABLED).
ENA-
 
Request
Callback
Yes! I am Interested

CS-M22430 Close Loop Stepper Motor

CS-M22430 Close Loop Stepper Motor
  • CS-M22430 Close Loop Stepper Motor
  • CS-M22430 Close Loop Stepper Motor
  • CS-M22430 Close Loop Stepper Motor
  • CS-M22430 Close Loop Stepper Motor
Get Best Quote
Approx. Price: Rs 4,226 / PieceGet Latest Price

Product Details:

No Of Phase2
Step Angle1.8 Degree
Voltage2.3 V
Current<100 mA
Model Name/NumberNema 24
Power Supply Input FrequencyHigh Precision, Low Motor Heating, and Low Vibration
Steps Per Rotation1.8 Degree

  • The CS-M22430 is a 2 phase stepper motor with 3 N.m (425 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder. Build with high quality materials including bearings and shaft made by Japanese manufacturers, this closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.
Request
Callback


Additional Information:

  • Item Code: CS-M22430
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

39 HS 02 Two Phase Stepper Motor

39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
  • 39 HS 02  Two Phase Stepper Motor
Get Best Quote
Approx. Price: Rs 1,220 / PieceGet Latest Price

Product Details:

Step Angle1.8 Degree
Of Leads8
Model39 HS 02
Dielectric Strength500 VAC For One Minute
Insulation Resistance1000M Ohm min
Shaft Axial Play0.08 max ( 450 g load)
Shaft Radial Play0.06 max ( 450 g load)
Angle Accuracy+/- 5% ( Full step no Load)
Temperature Rise80 degree C
Ambient Temperature-10 degree C~+ 50 degree C
Holding Torque0.22 Nm
Current Phase0.6 A
Phase2
NEMA Size16
Weight0.20 kg
Length L34 mm
Match DrivesEM402/DM422C

Riding on unfathomable volumes of industrial expertise, we are providing a broad array of 39 HS 02  Two Phase Stepper Motor.

Detail:
The 39HS02 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 4 motor leads.

Features:
  • 2 phase 1.8° stepping angle
  • NEMA 16
  • Holding toque of 0.22 N*m (31.2 oz-in)
  • High precision
  • Smooth movement
  • Low motor heating
  • Low movement noise
Request
Callback
Yes! I am Interested

Closed Loop Stepper Motor

Closed Loop Stepper Motor
  • Closed Loop Stepper Motor
  • Closed Loop Stepper Motor
  • Closed Loop Stepper Motor
  • Closed Loop Stepper Motor
  • Closed Loop Stepper Motor
Get Best Quote
Approx. Price: Rs 7,000 / PieceGet Latest Price

Product Details:

TypeExternally Excited
No of Phase1
Current101-200 mA
Step Angle0.9 Degree
Torque0.21-0.40 mNm
Country of OriginMade in India

With sincerity and hard work of our professionals, we have carved a niche for ourselves in this domain by providing a premium quality gamut of Closed Loop Stepper Motor.

Detail:
We are the respectable Manufacturer, Importer, Exporter and Supplier of Closed Loop Stepper Motor. Our Closed Loop Stepper Motors are precisely designed in compliance with the laid industry norms and standards. Corrosion resistance, high performance, power efficiency and longer functional life are the highlights of our Closed Loop Stepper Motors. Buyers are free to place medium as well as bulk orders with us; we promise timely delivery.
Request
Callback
Yes! I am Interested

STEPPER DRIVE DH 2522 MC

STEPPER DRIVE DH 2522 MC
  • STEPPER DRIVE DH 2522 MC
  • STEPPER DRIVE DH 2522 MC
  • STEPPER DRIVE DH 2522 MC
Get Best Quote
Approx. Price: Rs 6,000 / PieceGet Latest Price

Product Details:

Minimum Order Quantity1 Piece
BrandITC
Output PowerDC
Output Current7.1 AMP
Input PhaseSingle Phase
Input Voltage220 V AC
Model Name/NumberDH 2522 MC
Usage/ApplicationCNC
Country of OriginMade in India

Established as a Partnership firm in the year 2016, we “Industrial Trading Centre” are a leading Manufacturer of a wide range of Stepper DrivesTwo Phase Stepper Motor, etc. Situated in Surat (Gujarat, India), we have constructed a wide and well functional infrastructural unit that plays an important role in the growth of our company. We offer these products at reasonable rates and deliver these within the promised time-frame. Under the headship of our mentor “Mr. Umesh Mokani”, we have gained a huge clientele across the nation.
Request
Callback


Additional Information:

  • Production Capacity: 50
  • Delivery Time: 1 DAY
  • Packaging Details: BOX PACKING
Yes! I am Interested

Close Loop Stepper Motor CS-M21702

Close Loop Stepper Motor CS-M21702
  • Close Loop Stepper Motor CS-M21702
  • Close Loop Stepper Motor CS-M21702
Get Best Quote
Approx. Price: Rs 2,720 / PieceGet Latest Price
Product Brochure

Product Details:

No Of Phase2
Step Angle1.8 Degree
Voltage2.1 V
Torque0.21N.M
Current1.5 A
DimensionNema 17
Country of OriginMade in India

The CS-M21702 is a 2 phase stepper motor with 0.21 N.m (30 oz-in) holding torque and integrated with a 1,000 line (4,000 counts/revolution) differential ended rotary encoder. Build with high quality materials including bearings and shaft made by Japanese manufacturers, this closed loop stepper motor can be adopted in many industrial applications with excellence performance such as high precision, low motor heating, and low vibration.
Request
Callback


Additional Information:

  • Item Code: CS-M21702
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

Hybrid Stepper Motor 42CM08-1A

Hybrid Stepper Motor 42CM08-1A
  • Hybrid Stepper Motor 42CM08-1A
  • Hybrid Stepper Motor 42CM08-1A
Get Best Quote
Approx. Price: Rs 915 / PieceGet Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
No Of Phase2
Step Angle1.8 Degree
Model Name/Number0.8N.m (114 oz-in)
BrandITC
Voltage4.5 V
Torque0.8N.m (114 oz-in)
DimensionNEMA 17
Weight0.5 kg (1.10 lb)

The 42CM08-1A is a 2 phase NEMA 17 stepper motor with 0.8 N.m (114 oz-in) holding torque. It can be implemented in many Industrial motion control applications. Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this 42CM08-1A stepper motor can move the attached load at high precision and with very low motor heating & vibration.
Request
Callback


Additional Information:

  • Item Code: 42CM08-1A
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

CS-M 23445-B

CS-M  23445-B
  • CS-M  23445-B
  • CS-M  23445-B
  • CS-M  23445-B
Get Best Quote
Approx. Price: Rs 10,000 / PieceGet Latest Price

Product Details:

No Of Phase2
Model Name/NumberCS-M23445B
BrandITC
Voltage2.0 V
Torque4.0N.m (567 oz-in)
Current4.0 A/Phase
DimensionNEMA 34
Phase2
Weight2.7KG
FrequencyHigh precision, low motor heating, and low vibration
WarrantyNo Warranty
Shaft Diameter14 mm (0.551 inch)

The CS-M23445B is a 2 phase NEMA 34 closed loop stepper motor with 4.0 N.m (567 oz-in) holding torque and integrated with a 24 volt permanent magnet brake with 4.0 N.m (567 oz-in) friction torque.
Built with premium quality materials including bearings and shaft made by Japanese manufacturers, this CS-M23445B stepper motor can move the attached load at high precision and with very low motor heating & vibration.
The integrated 24 VDC brake can be controlled by a closed loop stepper drive or another control device such as a PLC or motion controller, and automatically engaged whenever the motor is powered off.
Request
Callback


Additional Information:

  • Item Code: CS-M23445B
  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

42 HS 03 Two Phase Stepper Motor

42 HS 03  Two Phase Stepper Motor
  • 42 HS 03  Two Phase Stepper Motor
  • 42 HS 03  Two Phase Stepper Motor
  • 42 HS 03  Two Phase Stepper Motor
Get Best Quote
Approx. Price: Rs 750 / PieceGet Latest Price

Product Details:

Step Angle1.8 Degree
Of Leads8
Model42 HS 03
Dielectric Strength500 VAC For One Minute
Insulation Resistance1000M Ohm min
Shaft Axial Play0.08 max ( 450 g load)
Shaft Radial Play0.06 max ( 450 g load)
Current Phase1.4 A
NEMA Size17
ConnectionParallel, Series, Unipolar
Phase2
Weight0.34 kg
Length L48 mm
Angle Accuracy+/- 5% ( Full step no Load)
Ambient Temperature-10 degree C~+ 50 degree C
Temperature Rise80 degree C
Holding Torque0.47, 0.34 Nm

The 42HS03 two-phase stepper motor is suitable for a wide range of motion control applications. Terminated with 8 motor leads, the motor can be connected in a few different ways, including bipolar series , bipolar parallel and unipolar.


Features:
  • 2 phase 1.8° stepping angle
  • NEMA 17
  • Holding toque of 0.47 N*m (67 oz-in)
  • High precision
  • Smooth movement
  • Low motor heating
  • Low movement noise
Request
Callback
Yes! I am Interested

DC Servo Driver DCS810

DC Servo Driver DCS810
  • DC Servo Driver DCS810
  • DC Servo Driver DCS810
  • DC Servo Driver DCS810
Get Best Quote
Approx. Price: Rs 5,000 / PieceGet Latest Price
Product Brochure

Product Details:

FrequencySmall Size, Surface-mount Technology
BrandITC
Output Current400 W
Input Voltage80 VDC
Input Phase1 - Phase
Model Name/NumberITC 18-80VDC
EncoderSingle Ended

The DCS810 is a digital DC servo driver developed with DSP and high efficient MOSFET technologies. In position control, it's easy for the end users to change stepping drivers to the DCS810 without changing control systems, because its input command is PUL/DIR signal, which is compatible with that of stepping drivers. In low power motion control applications, performances of DC servo systems using the DCS810 are better than those of digital AC servo systems in velocity, precision, noise, stability, or at least as good as those of digital AC servo systems. However, the cost of the DCS810 stays at the price line of stepping driver, namely far lower than those of AC servo drivers.

Compared to the DCS810S, the DCS810 can accept differential control signals and differential encoder feedback signals, offering better anti-interference performances. Compared to the DB810A, parameter visible tuning tools make the DCS810 much easier to tune.

The DCS810 is very easy to tune and all parameters are visible. Parameter visible tuning tools, including Pro Tuner (Windows based setup software) and STU (Small servo tuning unit) can meet different tuning environments or requirements.
Request
Callback


Additional Information:

  • Production Capacity: 200
  • Delivery Time: 1 DAY
  • Packaging Details: BOX
Yes! I am Interested

ES-D808 Easy Servo Drives

ES-D808 Easy Servo Drives
  • ES-D808 Easy Servo Drives
  • ES-D808 Easy Servo Drives
  • ES-D808 Easy Servo Drives
  • ES-D808 Easy Servo Drives
Get Best Quote
Approx. Price: Rs 9,000 / PieceGet Latest Price
Product Brochure

Product Details:

Encoder Resolution1000 Line
Weight570 g
Command InputStep/ Direction,Enable/Disable
Status OutputIn Position,Fault Status
Operating Voltage75 VDC
Output Peak8A
Maximum Input Frequency200 kHz
Matching MotorsES-M22415,ES-M22430
Model NoES-D808
Control AlgorithmSVPWM
Encoder FeedbackA,B9 Differential) Over Current,Over voltage,Position Following Error

ES-D808 is one of the models in Leadshine ES-D series easy servo drives which can take 24-80 VDC input voltage and output 0.5 - 8.2 A continuous load-based current. It is capable of driving NEMA 17, 23, 24 and 34 easy servo motors (stepper motors with encoders) with the position loop closed in real time.

Based on latest DSP technology and adopting Leadshine''s advanced control algorithm, ES-D808 easy servo drive applies servo control on easy servo motors. When adopted with an easy servo motor, it combines features of both open loop steppers & brushless servo systems, and offers many unique advances features for excellent motion control system performance.

Same as servo drives in traditional brushless servo systems, an ES-D808 easy servo drive takes encoder feedback from a driven ES-M series easy servo motor to close the position loop and eliminate the possibility of lose of movement synchronization. Therefore, loss of steps which limits adoption of stepper systems is totally eliminated in ES-D808 driven easy servo systems. Compared with constant output current in open loop stepper drive, output current from an ES-D808 servo drive to the driven motor is load based. When torque requirement is low, the output current is automatically lowered to the level of "just enough". But when the torque requirement is high, an ES-D808 easy servo drive can boost the output current quickly, up to 8.2A. This can significantly improve control system response time, offer excellent acceleration performance, and reduce motor heating by as much as 50% over open-loop stepper systems. Also, there is no torque reservation needed for an ES-D808 driven easy servo system. In an ES-D808 driven easy servo system, it always allows 100% torque implementation available from the driven easy servo motor and thus improves system high speed performance by as much as 30% over comparable open loop stepper systems. In addition, smoothness and quietness are also significantly improved in ES-D808 driven easy servo systems over steppers.

Compared with traditional brushless servo systems, cost for ES-D808 driven easy servo systems is significantly lower. They also outperform comparable traditional brushless servo systems for the features of much higher low-middle speed torque, high standstill stiffness, no hunting (shaking), no overshooting, and almost zero settling time. In addition, plug-and-play setup for almost all applications makes ES-D808 driven easy servo system much simple to set up, over hard-to-configure brushless servo systems which usual involve configurations of tens of parameters.

When an ES-D808 easy servo drive is implemented with a Leadshine ES-M series easy servo motor, there is No Configuration Needed for almost all applications. The output resolution from ES-D808 with the output resolution defaulted to output resolution of 2,000 pulses per resolution (equal to 10 microstep in 2-phase stepper systems). Via DIP switches, a user can also easily changes the output resolution to one of 15 output resolutions 800 to 51,200 (equal to 4-256 microstep in 2-phase stepper systems). With Leadshine configuration software, ProTuner, an advanced user can also set custom settings of resolution, current & position loop parameters, idle current percentage, etc.

Features:
  • Step and direction control
  • Closed position loop for no loss of movement synchronization
  • Operating voltage: 24-80 VDC
  • Load based output current of 0.5 - 8.2 A
  • High torque at starting and low speed
  • No torque reservation
  • High stiffness at standstill
  • Significantly reduced motor heating
  • Smooth motor movement and extra low motor noise
  • Quick response, no delay and zero settling time
  • No loss of steps; no hunting; no overshooting
  • Plug-and-play and no tuning for most applications
Request
Callback
Yes! I am Interested

ES-DH2306 Easy Servo Drives

ES-DH2306 Easy Servo Drives
  • ES-DH2306 Easy Servo Drives
  • ES-DH2306 Easy Servo Drives
  • ES-DH2306 Easy Servo Drives
  • ES-DH2306 Easy Servo Drives
Get Best Quote
Approx. Price: Rs 5,500 / PieceGet Latest Price

Product Details:

Input Phase1 - Phase
Encoder Resolution1000 Line
Weight1800 g
Command InputStep/ Direction, Enable/Disable
Maximum Input Frequency200 kHz
Control AlgorithmSVPWM
Model NoES-DH2306
Status OutputIn Position, Fault Status
Encoder FeedbackA,B9 Differential) Over Current, Over voltage,Position Following Error
Matching MotorsES-MH33480,ES-MH342120, ES-MH342200
Operating Voltage230 VDC
Output Peak6 A

With our years of experience & in-depth knowledge in this field, we are engaged in offering a quality-assured array of ES-DH2306 Easy Servo Drives.


Detail:
ES-DH2306 is one of the models in Leadshine ES-DH series easy servo drives which can take direct 110/120 or 220/230 VAC input voltage, and output 0.5 - 8.0 A (ES-DH1208) or 0.5 - 6.0 A (ES-DH2306) continuous load-based current. It is capable of driving NEMA 34 and 42 easy servo motors (stepper motors with encoders) with the position loop closed in real time.

Based on latest DSP technology and adopting Leadshine's advanced control algorithm, ES-DH2306 easy servo drive applies servo control on easy servo motors. When adopted with an easy servo motor, it combines features of both open loop steppers & brushless servo systems, and offers many unique advances features for excellent motion control system performance.

Same as servo drives in traditional brushless servo systems, an ES-DH2306 easy servo drive takes encoder feedback from a driven ES-MH series easy servo motor to close the position loop and eliminate the possibility of lose of movement synchronization. Therefore, loss of steps which limits adoption of stepper systems is totally eliminated in ES-DH2306 driven easy servo systems. Compared with constant output current in open loop stepper drive, output current from an ES-DH2306 servo drive to the driven motor is load based. When torque requirement is low, the output current is automatically lowered to the level of "just enough". But when the torque requirement is high, an ES-DH2306 easy servo drive can boost the output current quickly, up to 6.0A. This can significantly improve control system response time, offer excellent acceleration performance, and reduce motor heating by as much as 50% over open-loop stepper systems. Also, there is no torque reservation needed for an ES-DH2306 driven easy servo system. In an ES-DH2306 driven easy servo system, it always allows 100% torque implementation available from the driven easy servo motor and thus improves system high speed performance by as much as 30% over comparable open loop stepper systems. In addition, smoothness and quietness are also significantly improved in ES-DH2306 driven easy servo systems over steppers.

Compared with traditional brushless servo systems, cost for ES-DH2306 driven easy servo systems is significantly lower. Starting and low-speed huge output torque from an EM-DH2306 driven easy servo motor is way higher than torque from simliar size brushless servo motors. Such systems also outperform comparable traditional brushless servo systems for high standstill stiffness, no hunting (shaking), no overshooting, almost zero settling time, and plug-and-play setup with no tuning for most applications. In addition, plug-and-play setup for almost all applications makes ES-DH2306 driven easy servo system much simple to set up, over hard-to-configure brushless servo systems which usual involve configurations of tens of parameters.


Features:
  • Step and direction control
  • Closed position loop for no loss of movement synchronization
  • No loss of steps; no hunting; no overshooting; Direct 110/120/220/230 VAC input
  • Operating voltage: 150 - 230 VAC or 212 - 325 VDC
  • Load based output current of 0.5 - 6.0 A
  • High torque at starting and low speed
  • No torque reservation
  • High stiffness at standstill
  • Significantly reduced motor heating
  • Smooth motor movement and extra low motor noise
  • Quick response, no delay and zero settling time
  • On-board LED panel for custom configuration and motion mode display
  • Plug-and-play and no tuning
  • Also capable of driving normal 3 phase stepper motor

 

Request
Callback
Yes! I am Interested
X

Product Videos

Explore More Products

View All Products




Reach Us
Umesh M MOKANI (Partner)
INDUSTRIAL TRADING CENTER
B- 143, Ground Floor, Kamal Park Society, Part-2
Varachha Road, Surat - 395006, Gujarat, India
Get Directions


Call Us


Send E-mail