INDUSTRIAL TRADING CENTER
Varachha Road, Surat, Gujarat
GST No. 24AAFFI6374J1Z5
TrustSEAL Verified
Call 0804763887986% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Brand | Leadshine |
| Output Power | 36 - 72 VDC |
| Output Current | 0.5 - 8.0 A (default by 8.0 A, increased by 0.1 A) |
| Input Voltage | 36 - 72 VDC |
| Model Name/Number | 36 - 72 VDC |
| Country of Origin | Made in India |
Leadshine CS-D808 is a closed loop stepper drive. When used to drive a 2-phase stepper motor in frame sizes NEMA 17, 23, 24, or 34 with incremental rotary encoder, it can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system. The CS-D808 adopts Leadshine advanced control algorithm. It is very easy to configure and setup. It It is ideal for upgrading open loop stepper systems, or replacing servo systems in some low to middle speed applications.
Compared with an open loop stepper system, a CS-D808 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …
When compared with a servo system, a CS-D808 adopted closed loop stepper system can have much higher low-to-middle-speed torque. such a control system also has the advantages of no tuning, no hunting, no overshooting, and much lower cost.
Additional Information:
Product Details:
| Brand | ITC |
| Input Voltage | 220VAC |
| Input Phase | 1 - Phase |
| Model Name/Number | ELP-D400Z |
| Country of Origin | Made in India |
| Packaging Type | Box |
| Servo drive model: | ELP-D400Z |
| Rated output power: | 400W |
| Rated output current(A): | 2 |
| Max output current(A): | 8.5 |
| Dimensions(mm): | 40*175*156 |
| Main power: | 1-phase 190Vac – 240Vac , 50/60Hz |
| Control power: | 1-phase 190Vac–240Vac, 50/60Hz |
| Control mode: | IGBT SVPWM sinusoidal wave control |
| Feedback mode: | 17bit single-turn incremental encoder/23bit multi-turn absolute encoder |
| Input pulse: | 0-500kHZ,5V differential input |
| Position band width: | 200HZ |
| Electronic gear ratio: | 1~32767/1~32767 |
| Analog input: | -10~10Vdc,input resistance 20KΩ, no isolation |
| Velocity bandwidth: | 500HZ |
| Input signal: | Di???9 inputs (common-cathode , common-anode ) Servo enable, over-travel inhibition, gain switching, command pulse inhibition, speed zero clamp, deviation counter clear, alarm clear |
| Output signal: | Do???6 outputs ( 4 single-ended , 2 differential ) Alarm output, servo-ready, at-speed, zero-detection, velocity coincidence |
| Encoder signal output: | A phase, B phase, Z phase, long-distance drive mode output |
| Alarm function: | Over-voltage, under-voltage, over-current, over-load, encoder error, position deviation error, brake alarm, limit alarm, over-speed error etc. |
| Debug software: | All setting values of current loop, velocity loop , position loop can be modified and saved with Motion Studio software , all setting values can be downloaded and uploaded |
| Communication interface: | USB???Based on Modbus protocol (according to USB2.0 specification) RS485 |
| Brake mode: | Built-in brake resistor or external resistor |
| Adapt load inertia: | Less than 30 times motor inertia |
| weight: | About 1.5-3Kg |
Additional Information:
Product Details:
| Brand | ITC |
| Output Power | 1000W |
| Output Current | 21 MAX |
| Input Voltage | 220VAC |
| Input Phase | 1 - Phase |
| Model Name/Number | ELP-D1000Z |
| Encoder | A phase, B phase, Z phase, long-distance drive mode output Alarm function: Over-voltage, under-volt |
ELP series AC servo products are high performance AC digital servo which is designed for position/velocity/torque high accurate control,power range up to 2kW and it can provide intelligent performance with easy tuning process.
Combined with abundant features like MFC,vibration suppression,Multi-mode filter function,etc.It provides machines a compact size,low tuning works.With high resolution up to 23-Bit,which can be used for high accuracy applications.
Additional Information:
Product Details:
| Brand | Leadershine |
| Input Phase | 1 - Phase |
| Model Name/Number | ELP-D750Z |
| Country of Origin | Made in India |
| Packaging Type | Box |
| Service Type | AC |
ELP series AC servo products are high performance AC digital servo which is designed for position/velocity/torque high accurate control,power range up to 2kW and it can provide intelligent performance with easy tuning process.
Combined with abundant features like MFC,vibration suppression,Multi-mode filter function,etc.It provides machines a compact size,low tuning works.With high resolution up to 23-Bit,which can be used for high accuracy applications.
Additional Information:
Product Details:
| Brand | Leadshine |
| Model | DCS810 |
| Peak output current | 0-20A |
| Supply voltage | +18~+80VDC |
| Logic signal current | 7~15 mA |
| Pulse input frequency | 0-500KHz |
| Isolation resistance | 500 Mohm |
| Current provided to encoder | 50 mA |
| Pin Function | Details |
| PUL+ | Pulse signal: In single pulse (pulse/direction) mode, this input represents pulse signal; 4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. In double pulse mode (pulse/pulse) , this input represents clockwise (CW) pulse,effective at LOW level (the fixed level). For reliable response, pulse width should be longer than 1.0µs. Series connect resistors for current-limiting when using +12V or +24V control signals. |
| PUL- | |
| DIR+ | DIR signal: In single-pulse mode, this signal has low/high voltage levels, representing two directions of motor rotation(set by inside R33 and R37); in double-pulse mode, this signal is counter-clock (CCW) pulse,effective at LOW level (the fixed level). For reliable motion response, DIR signal should be ahead of PUL signal by 5µs at least. 4-5V when DIR-HIGH, 0-0.5V when DIR-LOW. Please note that motion direction is also related to motor-driver wiring and encoder feedback A/B phase signals. Exchanging the connections of two wires of the motor to the driver and A/B phase signals of encoder will reverse motion direction. |
| DIR- |